Picture Name

News Center

Dental resin heater

Sep 27,2025

Dental resin heater

In the field of dental restoration, composite resin has become the mainstream material for fillings and veneer restorations due to its aesthetic appeal, ease of handling, and biocompatibility. However, the physical properties of resin materials are significantly influenced by temperature: at low temperatures, resin becomes hard and less fluid, making it prone to trapping air bubbles and resulting in marginal gaps during direct filling; while at high temperatures, the material may degrade or pose operational risks. The introduction of dental resin heaters, equipped with precise temperature-control technology, effectively resolves this challenge, making them an essential tool for enhancing the quality of restorative procedures.

Emergency Stop Anti-Dislodgement System – Root Canal Motor

Sep 26,2025

Emergency Stop Anti-Dislodgement System – Root Canal Motor

The system offers two reversal modes: - Automatic mode: Immediately after torque exceeds the limit, it performs a 0.5-second counterclockwise rotation, then resumes forward motion once stress is released. - Manual mode: The physician can actively trigger reversal using the handle button, making it ideal for adjusting complex root canal configurations.

A dental high-speed handpiece with a four-point water spray and backflow prevention feature

Sep 26,2025

A dental high-speed handpiece with a four-point water spray and backflow prevention feature

As the core instrument in dental treatments, the performance of high-speed dental handpieces directly impacts both surgical efficiency and patient safety. Traditional devices have long plagued clinical practice with issues such as cross-infection caused by backflow contamination and inadequate cooling, as well as equipment wear and tear. However, an innovative model integrating four-point water spray and anti-backflow technology has redefined treatment standards through groundbreaking advancements, emerging as an indispensable "safety guardian" in modern dentistry.

Dental Instrument – Root Canal Length Measurer

Sep 26,2025

Dental Instrument – Root Canal Length Measurer

The root canal length measurer, also known as an electronic apex locator or apical tester, is an indispensable precision electronic instrument in modern dental treatment. Its core function is to accurately pinpoint the position of the apical foramen using impedance measurement technology, thereby determining the working length of the root canal. This innovative technique overcomes the limitations of traditional X-ray projection errors, boosting measurement accuracy to within millimeter-level precision and providing clinicians with exact guidance in three-dimensional space during root canal therapy.

Root canal motor with 360° circumferential illumination

Sep 25,2025

Root canal motor with 360° circumferential illumination

Traditional root canal treatment suffers from significant drawbacks related to light dependency: external light sources struggle to penetrate deep oral tissues, head-mounted devices often cause lighting misalignment due to the dentist’s head movements, and shadows created by the complex internal structures of the root canal—such as lateral canals and isthmuses—can obscure the lesion area altogether. At the heart of the 360° lighting technology is the integration of high-brightness LED light sources directly into the root canal motor unit itself, enabling seamless, shadow-free illumination across a full 360-degree rotation of the handpiece.

Foshan Liangya Right-Angle AI Adjustable Light-Curing Machine

Sep 25,2025

Foshan Liangya Right-Angle AI Adjustable Light-Curing Machine

The design of the right-angle light-guiding system is another major technological highlight. Traditional light-curing units often suffer from operational blind spots due to the limited bending angle of their light guides, whereas Liangya’s innovative 90° right-angle light guide can reach deep into the posterior dental region of the mouth. Combined with a 360° rotating lamp head, this allows dentists to complete full-mouth curing without needing to reposition the patient.

Foshan Liangya Lighted Dental High-Speed Handpiece

Sep 25,2025

Foshan Liangya Lighted Dental High-Speed Handpiece

In terms of the turbine movement, Liangya incorporates **ceramic bearings** and **aerodynamically optimized** technology, enabling the rotor speed to remain stable within the range of 350,000–400,000 rpm, while delivering a torque output of up to 28 N·cm. Compared to the industry average, its power decay rate is reduced by 60%, meaning that even after continuously preparing 10 molars, the speed fluctuation remains tightly controlled within ±2%. More critically, the product features an **anti-backflow design** that effectively prevents the reverse flow of saliva and blood.

How exactly do you use the Foshan Liangya Dental Waxing Knife Heater?

Sep 23,2025

How exactly do you use the Foshan Liangya Dental Waxing Knife Heater?

First, connect the power supply and turn on the power switch located at the back. At this point, the machine is already running. Simply insert the wax knife into the central hole for 2–3 seconds—this completes the heating process. Our machine operates on the principle of electromagnetism, similar to how a microwave oven works. Since the wax knife is made of metal, the electromagnetic field induces heat, causing the knife to warm up rapidly. Safety note: Because the machine relies on electromagnetic induction rather than direct contact with metal parts, you won’t experience heating or burns—even if you accidentally reach in with your hand. Plus, there’s no open flame involved, making it completely safe for use in dental labs or denture manufacturing facilities. This is the most critical feature for professionals in these fields.

Press-type needle removal stainless steel dental high-speed handpiece

Sep 23,2025

Press-type needle removal stainless steel dental high-speed handpiece

This is our dental high-speed handpiece made from stainless steel. Stainless steel material offers superior resistance to corrosion. Pressing the button to release the needle enhances the efficiency of both removing and replacing needles. Additionally, it comes with three different head sizes: standard, large, and 45-degree angled. Moreover, it features imported ceramic bearings, significantly improving performance by reducing noise, enhancing operational strength, and extending the lifespan of the device.

Foshan Liangya Dental Mobile High-Pressure Oil Gun

Sep 23,2025

Foshan Liangya Dental Mobile High-Pressure Oil Gun

Foshan Liangya's high-pressure oiling gun can be used to lubricate all types of mobile phones, while the oiling machine requires replacing its accessories. Moreover, our high-pressure oiling gun only needs you to press the switch against the designated port for 2-3 seconds to complete the oiling process. Thanks to its high-pressure design, it effectively flushes out dirt and debris from inside the mechanism, helping to extend the lifespan of the internal components. Convenient, quick-connect, highly efficient, compact in size—these are the key advantages that make our product stand out.

< 1...91011...40 > proceed page

SAF Coolest v1.3.1.2 设置面板GAGSD-ZGYF-JQXZE-ZXD

营业执照及SEO链接： Business License

无数据提示

No information for the time being

 

V1.3.1 SVG图标库请自行添加图标，用div包起来，并命名使用